Tokoname yaki

Is this a yixing pot?

At first glance it might be, but look closer

Maybe not?

The pot is a tokoname yaki, which are sort of the Japanese equivilent of Yixing pottery. They are widely used to make tea, and most of the time, the pottery comes in the shape of a typical Japanese kyusu, with a side handle rather than the back handle like this one. However, in the 19th century I believe some guy from China (IIRC he’s called Jin Shiheng) went to Japan and taught them how to make Yixing style pottery, and so nowadays there are pots that look like this — sort of Yixing like in their appearance.

The clay, as you can see, is a bit on the orange side of things. It’s very fine. The pot is thrown on a wheel, I think, rather than being molded like a Yixing pot would. In this sense, it sort of reminds me of Shantou pots from China, which are also of an orange colour clay and thrown on wheels.

This particular pot was extremely dirty (and thus extremely cheap), and after cleaning, I discovered that there’s a nasty crack at the tip of the spout. It’s still usable, but doesn’t pour very well. I bought it partly as an experiment to see the clay for myself, and to play around with it, eventually. There’s a Yamada Jozan (four generations of them now) who is the most famous of these potters who make such back-handled pots. Prices for those can be rather high because that line is basically designated as National Living Treasures in Japan… and I am personally not sure what the value in them may be, other than as art objects.

Regardless, one more toy from Japan.


Tokoname yaki — 10 Comments

  1. @MarshalN – 

    Why wouldnt it be wise? If it’s unglazed, the clay body should be the same all the way through.

    I cant see the image at work to see how much needs to be ground, but potters grind stuff all the time.
    Take a look at the bottom of vases, cups, etc, and you’ll see that it’s pretty common practice.

  2. Mostly because the crack extends halfway down the spout. I’d have to ground about half of it off…. whereas right now it is only very slightly leaky. In any normal brewing circumstances (say a few seconds infusions) it won’t affect the tea at all. Whereas if I ground it down, it will reduce the capacity of the pot quite significantly.

    Thus grounding it down might not be the wisest choice.

  3. Hmm.. that’s a good reason.

    The horizontal water line… is deceptive.

    That’s why when they do shui pin’s it’s the top of the spout that is even with the collar, and not the bottom of the spout. You might think that it should leak until the liquid level is even with the bottom of the spout hole, but we know that it does not.

    The spout can be a bit lower than you’d think because surface tension tries to keep the liquid in.

Leave a Reply to MANDARINstea Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.